Reported February 2006

BACKGROUND: Student designers at the College for Creative Studies are creating new plastic polymer materials as alternatives for automobile elements typically made of steel. The designs were part of a semester-long project sponsored by the American Plastics Council and the automotive division of the Society of Plastics Engineers.

ADVANTAGES: Among other advantages, plastics can significantly reduce the weight of a vehicle, improving fuel efficiency by reducing drag, and also cutting down on emissions. Because plastic can be more easily molded, components can be tailored for more comfortable human-ergonomic features, as well as more streamlined, aerodynamic shapes. Less material can be used than with steel components, and the durability of plastics results in a longer, more reliable vehicle lifetime.

ABOUT PLASTICS: Plastics are a type of polymer, a chemical substance made up of many very large, chain-shaped molecules. These molecules in turn form thousands of repeating units, much like the links in a chain. Linking together different monomers into different length chains makes different plastics. Mixing polymers with various additives gives them many useful properties, which is why plastics are used so often in our everyday lives. Thermoplastics soften with heat and harden when cooled, such as polyvinylchloride (PVC) and Teflon. They are used in food packaging, milk and water bottles, electrical insulation, carpet fibers, and credit cards, among other applications. Thermosetting plastics harden with heat, such as epoxy and polyester. They can be found in mattresses, cushions, varnishes, glues, and coatings on electrical circuits.

MAKE YOUR OWN PLASTIC!Most plastics derive from oil (petroleum) but you can create the same kind of linked molecules with milk.

(1) Pour ½ cup milk or heavy cream into a saucepan and heat to simmering over low to medium heat

(2) Stir in a few spoonfuls of vinegar or lemon juice; continue adding until mixture starts to gel

(3) Remove pan from heat and cool, then rinse the rubbery curds with water. The curds are plastic, formed by the chemical reaction between the casein in the milk and the acid in the vinegar or lemon juice

The Institute of Electrical and Electronics Engineers, Inc., and the American Society of Mechanical Engineers contributed to the information contained in the TV portion of this report.

If you would like more information, please contact:

Automotive Learning Center
1800 Crooks Rd. Troy, MI 48084
(248) 244-8920

For more information on engineering, contact:

Institute of Electrical and Electronics Engineers, Inc.
IEEE-USA
1828 L Street, N.W., Suite 1202
Washington, D.C. 20036-5104
(202) 785-0017
ieeeusa@ieee.org
http://www.ieee.org

American Society of Mechanical Engineers
(973) 882-1170
(800) 843-2763
infocentral@asme.org
http://www.asme.org/

FACTOID...

Ford's Model T, introduced in 1908, was named Car of the Century in 2000.